サブページメイン画像

  • HOME
  • 故障修理
  • ★toyota30Alphard/Vellfire How to disassemble the sliding door japan saga kyowaauto

★toyota30Alphard/Vellfire How to disassemble the sliding door japan saga kyowaauto

 30Alphard how to the disassemble the sliding door

Remove interior and exterior and exterior parts

 Before removing the main interior

First,remove the rubber molding at the bottom of the interior

Then lock the door

After that,you can remove it by pulling the interior

There are no fixing screws.







 Remove the front garnish

First,remove this screw

pull out the metal stay



 Inner glass mall

Pull out while raising the integrated glass molding

 Anti-pinch rubber

Remove this connector and remove the pinch prevention rubber

 Remove the external door handle

First remove the connector,
then remove the bolt from the side to remove the switch base.

Pull out the main lever diagonally backward.





 Exterior parts of each part

All are fixed with resin pins and double-sided tape,not screw fixing.




次の記事★30Alphard/Vellfire How to remove the interior
前の記事LA650Sタントオートハイビーム光軸調整

その他のコンテンツもお楽しみください

  面白ページ(筆者の自己満足かも?)が盛りだくさん!ご覧ください。
広告を入れてない・・から・・好き放題に書きますよ!

ご意見・ご要望は・・お電話で直接どうぞ・・

現在のアクセス数2025年5月末現在  4103967アクセス

整備工場ホームページランキング 全国2位(1100社中)シナジーデザイン株式会社調べ


以下は・・バックナンバーです

故障修理の他のページ

お電話
お問合せ
お見積り